Jump to content

kmkaks

Game Library Staff
  • Posts

    1214
  • Joined

  • Last visited

Posts posted by kmkaks

  1. Dont think so

    N300 has a atx form factor

    Without the IO does the board fit normally?

    That padded io was also very annoying for me

    Yeah I am actually using the PC without the I/O shield. No issues without I/O, I have hanged/just temp fixed the I/O shield outside the chassis using the Audio outs and KBM Connection for support.lol.

  2.  

    No such card on Amazon India, share the link please.

     

    I got this one.

    Awesome!!!! Congrats!!! I had the HIS R9 270X before!!! :cheers:

     

    Check out this link :

     

    http://www.amazon.in/Gigabyte-Radeon-Graphics-GV-RX480G1-GAMING-4GD/dp/B01KCWZ1RW/ref=sr_1_11?ie=UTF8&qid=1481129710&sr=8-11&keywords=rx+480

     

    Shall I go ahead and get this GPU? I am planning to sell off my gtx 970 while it still has a market. Lol am afraid of GIMPVIDIA!!!

  3. That's the padded io shield . I have the same mobo . You need to push the mobo sideways with little force align at least one hole then screw it. Since I had a standoff it didn't cause much issue .

     

    Sent from my SM-G900H using Tapatalk

    The standoff's do not align with the mobo screwholes the I/O sheild disaligns the mobo unless pushed with force and due to the i/o shield pushing back, small dust like scrapes of the silver component from the bottom of the mobo started peeling off due to rubbing against the standoff's. Could this be a problem with the N300 screwholes placement?

     

    My fear is that the forcefull placement may bend/damage the mobo in the long term?

  4. No.

    Strange. First time I'm hearing of this lol.

    The motherboard will not align with the motherboard mounting screw if I have the I/O panel on. I am surprised too.... Did not have this issue with my old Gigabyte B85M board. Now I just bought a new asus b150M Pro gaming mobo and the I/O panel is pushing the mobo behind the closest mounting screws. I even tore off the plastc foam glued to the i/o panel with no luck.

    @ Alpha sample image of my problem.

    2gydfms.jpg

     

    The points I have marked in red will not align with the mounting screw.

    *** This is not my pc. I have already arranged cables and set it up so am a little lazy to remove mobo again. i just wanted to clarify the issu

  5. Is an I/O sheild neccessary? The I/O shield is not aligning with my motherboard no matter how hard I place it, even after actually fitting all 4 corners properly. The top screw next to the I/O shield is not aligning. What to do? Case : Cooler Master N300. Mobo : Asus B150M Pro Gaming

×
×
  • Create New...