Jump to content

Keyofx

IVG Author
  • Posts

    12979
  • Joined

  • Last visited

Posts posted by Keyofx

  1. 18 minutes ago, STICK3Rboy said:

    So I should be able to both upgrade to the PS5 version and purchase SM remastered with a PS4 disc of Miles Morales right?

     

    I just upgraded to and downloaded the PS5 version, so that's definitely working. I'll look up the remastered upgrade.

    • Thanks 1
  2. 4 minutes ago, kunjanp said:

    This doesn't retain power state after power cut? Is that problematic?

    https://www.amazon.in/dp/B08QH2FGF8/ref=cm_sw_r_cp_apa_fabc_SG0F5HRVQ58HM2BM6417

    This one from Philips has power state memory, is this good? Not available from Cloudtail/Appario though.

     

     

    Nah, these (thankfully) retain power state just fine. Would have been super annoying otherwise.

    • Like 1
  3. On 2/15/2021 at 1:18 PM, kunjanp said:

    Looking for LED battens to replace existing tubelights at home. Should be able to switch between warm/cold tones and controllable via app (is this via wifi/bt?). Alex and GA integration doesn't matter for me. But should be bright.

    Any suggestions? Which are the best ones?

    I use a bunch of those Wipro smart battens at home (connected via WiFi). No issues at all and I'd recommend them.

     

    They're plenty bright for my use, but just remember that they're rated 20W.

  4. 44 minutes ago, Assassins Creed said:

     

    :rofl: so much true, my 65 started feeling like 55 after walmount.. then I started using it by pulling front on the swivel stand so it appears upright, like on a stand and in air rather than being wall leveled and appearing small.. 

     

    Yea, I've noticed this in stores. The TVs always look small, which is why I've never wall mounted a single one! It looks much bigger when it's a bit more forward on the table. Say no to wall mount!

     

    @abhi90, it should be fairly simple to make out. Just have a good eye for detail, and you'll be able to tell if the packaging isn't factory and if the tape has been reapplied. It's really difficult to get anything repacked and looking like it's straight out of the factory, so I wouldn't worry too much!

    • Like 1
  5. 11 hours ago, Bird Bird Bird said:

     

    World of difference in brightness, man. We were using the 20w battens before, and upgraded all to 36/40w owning to size of the rooms. 

    Quite a visible difference. 

     

    Interesting! Not too many smart battens in general though, let alone any near 40W. Here's another option, although priced much higher and without RGB:

    https://www.amazon.in/Connected-Tuneable-Dimmable-Compatible-Assistant/dp/B08QH2FGF8

     

    I think your other option are switches. Sonoff does some decent ones, but I feel like the WiFi chips @psinide uses may be worth experimenting with.

     

     

     

  6. 6 hours ago, psinide said:

    Finished 3d printing the 1st prototype of the base for the lamp. Will add a few more pics, but here's a YT vid of it in action:

     


    Thinking of getting feet done in ply, the wiring will run from inside the feet f30dd1763c242a7bca0fd33ea2141d7f.jpg

    Sent from my SM-G998B using Tapatalk
     

     

    That’s a nice design! Did you do it yourself, or is it from one of those model download sites? And what printer are you on, btw?

  7. 11 hours ago, Bird Bird Bird said:

     

    Too bad they are limited to 20W. We have been using 36W LED battens for some time. The brightness will be a huge downgrade. Hope they bring more options. 

    Yea, it’ll definitely depend on the size of your rooms. I find them to be no different personally, but that could just be me being happy with the tech :D

×
×
  • Create New...