Jump to content

[PC] Ask The Experts Thread


arjun
 Share

Recommended Posts

it might sound skiddish bud did ur friend apply Thermal Interface Material? or thermal paste? Even if he did make sure u get something like AC MX2 for 350 or something and apply it so the temp would get down a bit.

 

As far as the OC level, i meant how far have to Overclocked your processor? since u haven't its no problem. but do check whether the TIM has been applied or not.

Link to comment
Share on other sites

:loco: i was d 1 who did all tht in SA's comp.....n trust me it was a pile of dust .... bot a nu thermal paste n applied ( cooler master )....since d beginning he has issues with power ..... n he doesnt kno how 2 OC , so not an issue.... :chair: n that guy doesnt even post completely wot i did :doh:

 

n im pretty much a pro in comp issues n troubleshooting ....so i hope ur questions are answered...

Edited by Lt. Enfielder
Link to comment
Share on other sites

Thanks a lot for ur help guys..the prob of pc shutting down whn running programs wich uses high processing power is solved..

The problem was overheating issue...

one of ma fren removed the heatsink...i cleaned it with water..thr was sme dust in it...put it back..its working well...

 

But the other prob still exists...pc suddenly shuts down...dis happens @ particular timings...i guess its due to power fluctuations..will get a UPS soon..

ma config

 

AMD Phenom 9950 quad core

4 gb ram..

 

don hv any additional GPU...using inbuilt 512 mb gpu..

 

i doono wat u mean by oc level n stuff..

 

dude,

 

check ur smps. This sort of a problem happens due to a faulty power supply unit. get ur smps checked.

Also in extreme case it can be caused by some problems in ur motherboard also.

 

peace

Link to comment
Share on other sites

dude,

 

check ur smps. This sort of a problem happens due to a faulty power supply unit. get ur smps checked.

Also in extreme case it can be caused by some problems in ur motherboard also.

 

peace

 

 

@Sa, anish is right abt the SMPS...i had a similar problem ...my problem was due to smps...the smps fan use to not work and it would get shut down due to heat ....SMPS change karke dekh....

 

its his 2nd PSU..he is using mine rite now.... its power fluctuations causing this problem....

Edited by Lt. Enfielder
Link to comment
Share on other sites

Thanks for the help guys...

 

When i said dust , i meant dust :majesty: ..thermal paste is applied...

 

I guess it has to do with the power supply...will be getting an UPS soon...

The problem does't happen always...it only happens in a particular time... i.e b/w 6 50 - 7 30....

in all other time its fine..oly @ this time..guess power fluctuates a lot @ dat time....

 

Thanks for all ur help... :wOOtjumpy:

 

cheers...

Link to comment
Share on other sites

Hi all..

 

I have 3 Internal HDD's and 2 Ext HDD's connected to my PC. A genric 450w PSU.

 

I have few issues, Any ideas?

 

1. During Video playback the player gets stuck and the HDD light blinks

continously. and i have to kill the app from task manager. sometimes

i cant access that HDD again after that and have to restart the machine

 

2. Sometimes one of my HDD's just disappear from My computer. I have to restart my machine many time.

 

I use Win7 and KmPlayer.

Link to comment
Share on other sites

The PSU cannot handle the load mate. Upgrade it to CM 460 if u dont want to spend too much or Tagan 500/Corsair 400 if its ok for u spend 3k.

 

At this rate the rate of failure will get compounded and u dont want to loose the data on them do u?

 

 

P.S just before that try changing the player to SMplayer or Mplayer and try once. if again the same sh@t happens then u have no choice but to upgrade.

Link to comment
Share on other sites

thanks SA for saving my time. I think I have exactly the same problem as SA

 

I guess it has to do with the power supply...will be getting an UPS soon...

The problem does't happen always...it only happens in a particular time... i.e b/w 6 50 - 7 30....

in all other time its fine..oly @ this time..guess power fluctuates a lot @ dat time....

 

same here. It happens only like 2 or 3 times in a day and when it happens I have to wait for like 10 mins to start again because of same reason as you

Link to comment
Share on other sites

Guys I have serious UPS issues as of now.....

The problem is I don't know how to maintain a UPS.....last week the battery was totally dead.....so no backup......

And so I left it in charge for several hours together.....no use.....still battery dead....the I kept it in charge for 2 whole days continuously (apart from the running time).....still dead....so I though the battery is compelety dead and left it like that and been using like a junction box for 2 or 3 days now.....suddenly today morning, power failiure and backup turns on! eventually it went out in seconds!

It is to be noted that I have a double battery UPS (The Microtek one).....and I have been having this issue ever since I connected my 360 also to the UPS.....Could it be that or is it just a fault from the UPS?

I believe I still have battery warranty left !

Can anyone help me out here....This is a real headache now!

 

Thanks! :(

Link to comment
Share on other sites

One word : Kaput.

 

That's what happened to your UPS mate. Get the battery replaced as soon as u can. No the xbox is not the culprit. Its just that the batteries which went for a hike.

Oh all along I thought this happened because of my xbox.....Thanks for the advice yaar.....gonna get it replaced soon! :P

Link to comment
Share on other sites

hey guyz

im haveing problem with my hp pavllion dv6000 dvd drive

ive just got bioshock2 on the pc bt my dvd drive wont read the any cds or dvds plz help need

the green light is blinking bt nothing is happening

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...