NitroNeo Posted October 29, 2015 Report Share Posted October 29, 2015 (edited) Its haswell certified You should have 0 problems!!! Mine is a skylake proc. I7 6700k. I also face a weird issue, if i put my display to sleep in balanced power settings for 2 or 5 minutes the monitor turns off after the said time but then again switches back on after some short time and then again after the said time it goes into sleep. So basically it takes double the time to sleep properly, idk if this is a win 8.1 bug or psu or bios related. Sent from my SM-N900 using Tapatalk Edited October 29, 2015 by NitroNeo Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 29, 2015 Report Share Posted October 29, 2015 ^ Sounds to me a monitor issue, which make and model? Also, what are your sleep settings for the PC and display. Might be that your PC triggers something. Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted October 29, 2015 Report Share Posted October 29, 2015 ^ Sounds to me a monitor issue, which make and model? Also, what are your sleep settings for the PC and display. Might be that your PC triggers something. Benq rl24hm, current setting are on balanced mode, display: sleep after 10 mins. PC sleep: never. Sent from my SM-N900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 29, 2015 Report Share Posted October 29, 2015 So why does it go into sleep in ~2 -->5 minutes in the first place? Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted October 29, 2015 Report Share Posted October 29, 2015 (edited) As i said i previously kept it on 2 and 5 minutes respectively then the display used to wake up after the said time and it properly went to sleep the second time after waking up automatically from the first. The reason i feel it's not a monitor issue is because if i start the pc and don't touch keyboard or mouse in short don't use the PC at all the monitor goes into proper sleep the first time itself. But if i use the pc then it wont. Sent from my SM-N900 using Tapatalk Edited October 29, 2015 by NitroNeo Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 29, 2015 Report Share Posted October 29, 2015 ^ Awkward, Google been of any help? Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted October 30, 2015 Report Share Posted October 30, 2015 This is the first time i posted about this till now i was thinking it was some windows issue. Didn't even know about these c6,v7 power states which made me think this issue vould have other origins. I will google it and get back. Sent from my SM-N900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 30, 2015 Report Share Posted October 30, 2015 ^ This is not a C6 / C7 issue. That would be limited to the PSU and internal components of the chassis. This seems more of a windows setting obfuscation. Have you tried reducing the sleep time of the monitor and see how it behaves. Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted October 30, 2015 Report Share Posted October 30, 2015 ^ This is not a C6 / C7 issue. That would be limited to the PSU and internal components of the chassis. This seems more of a windows setting obfuscation. Have you tried reducing the sleep time of the monitor and see how it behaves. Yes the issue seems to be on 2 and 5 min settings. I will check on 10 mins too. Sent from my SM-N900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted October 30, 2015 Report Share Posted October 30, 2015 By putting the monitor on 10 minutes sleep settings it goes to sleep after 15 minutues and then it sleeps properly until i movr the mouse to wake it up. Do you guys install the monitors driver ? On my old pc when i installed the monitor driver some issue occurred so since then i never installed those drivers and just use it like a plug and play device. Sent from my SM-N900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 30, 2015 Report Share Posted October 30, 2015 ^ Generally monitors are supposed to be Plug and Play but cannot comment on the new ones sadly. Quote Link to comment Share on other sites More sharing options...
Nr.Draca47 Posted October 30, 2015 Report Share Posted October 30, 2015 Nitro try this 1. Assuming your screensaver is off. Check for the time mentioned for the saver activation, alter its time (switch on to change time).Then see what happens. 2.Try this software, it shuts your display...Wizmo. Use -monoff in command parameters. Post the results. Quote Link to comment Share on other sites More sharing options...
Mizanurification Posted October 31, 2015 Report Share Posted October 31, 2015 I lost the nano receiver for my F710 gamepad, any way to get it working or purchase it? Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted October 31, 2015 Report Share Posted October 31, 2015 ^ Tried contacting LOGITECH India on this? Quote Link to comment Share on other sites More sharing options...
Mizanurification Posted November 1, 2015 Report Share Posted November 1, 2015 ^ Tried contacting LOGITECH India on this? Yeah no reply yet. I messaged them on their site. Do I have to mail them? Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted November 1, 2015 Report Share Posted November 1, 2015 ^ Try to call them if possible, directly. To their nodal manager. I think LOGITECH retails a Bluetooth receiver for multiple devices that work on a specific frequency. Not sure if it will function with the gamepad though. Also, this is the weekend, no one looks at the mails on Saturday / Sunday. Send another on Monday. 1 Quote Link to comment Share on other sites More sharing options...
Star Lord Posted November 1, 2015 Report Share Posted November 1, 2015 (edited) I have this router -> http://www.tp-link.com/en/products/details/cat-9_TL-WR740N.html#overview While trying to install the driver,there's always a network error and the TP Link configuration page i.e. tplinklogin.net is also not opening through any browser.It's connected to a normal modem through LAN wire.This Wi-Fi router was working fine until last month.I moved to a new place and the BSNL guy was able to setup the normal Modem properly but I'm having this issue with the Wi-Fi router.Please help. Edited November 1, 2015 by Archit Quote Link to comment Share on other sites More sharing options...
Star Lord Posted November 2, 2015 Report Share Posted November 2, 2015 anyone? Quote Link to comment Share on other sites More sharing options...
Aftrunner Posted November 3, 2015 Report Share Posted November 3, 2015 I am not sure I understand. What do you mean "Installing the drivers"? The drivers for what? The LAN or the Wifi or something else? Whats the error exactly? Quote Link to comment Share on other sites More sharing options...
NitroNeo Posted November 3, 2015 Report Share Posted November 3, 2015 So after a while i got a BSOD again, this time it was "IRQL not less or equal", with the help of blue screen view i have taken the following shots. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.