HotSonix Posted February 26, 2016 Report Share Posted February 26, 2016 ^^Could be the reason Quote Link to comment Share on other sites More sharing options...
Max Pain Posted February 29, 2016 Report Share Posted February 29, 2016 (edited) Is Cooler Master G650M good enough for GTX 980 Ti? If not, any quick suggestions in the same brand? EDIT: NVM. I have ordered Corsair RM 750X. Edited February 29, 2016 by The Panda Quote Link to comment Share on other sites More sharing options...
soumyablacklist Posted February 29, 2016 Report Share Posted February 29, 2016 I have a computer with Crosair 450 VS Power Supply. Crosair Vengence 8 GB Ram 1600 Hz, I5 4400 Processor and Asus Strix 960 GTX Graphics Card. My Computer is shutting down abruptly during gaming like BattleField or NFS. I performed OCCT Test on my machine CPU was tested for one hour it passed No Error was reported GPU Test at 1920x1280 Failed immediately as soon as the test was started GPU Test at 1280x1080 one hour it passed No Error was reported Power Supply Test at 1920x1280 failed immediately as soon as the test was started Power Supply Test at 1280x1080 failed immediately as soon as the test was started During all the failure of the system was restarted so there is no error log by the OCCT test application I have disabled my sound cards only the Realtek sound Card is active I am using spike strip to power my system. I am not able to debug the problem. I checked event viewer it said Source as Kernel Power Error and Event ID 41 Please help Thanks in advance Quote Link to comment Share on other sites More sharing options...
kemosabe Posted February 29, 2016 Report Share Posted February 29, 2016 your GPU is at fault, take it the nearest authorized service center. I have also doubt at your power supply, the Corsair VS is infamous Quote Link to comment Share on other sites More sharing options...
HotSonix Posted February 29, 2016 Report Share Posted February 29, 2016 Either gpu or power supply Isn't 450w too low for your system ?? Quote Link to comment Share on other sites More sharing options...
ALPHA17 Posted February 29, 2016 Report Share Posted February 29, 2016 I have a computer with Crosair 450 VS Power Supply. Crosair Vengence 8 GB Ram 1600 Hz, I5 4400 Processor and Asus Strix 960 GTX Graphics Card. Change that PSU of yours. Also, moving and merging thread into appropriate section. Quote Link to comment Share on other sites More sharing options...
mafia97 Posted March 1, 2016 Report Share Posted March 1, 2016 PSU seems faulty. Just to be sure, can you try GPU in another decent system? But most likely PSU is at fault and I would recommend not running the PC like this anymore. Sent from my MI 3W using Tapatalk Quote Link to comment Share on other sites More sharing options...
SonicDave Posted March 2, 2016 Report Share Posted March 2, 2016 @soumyablacklist change the PSU. your GPU is at fault, take it the nearest authorized service center. I have also doubt at your power supply, the Corsair VS is infamous PSU, and not the GPU, is clearly the problem here. Either gpu or power supply Isn't 450w too low for your system ?? Actually 450w is enough. No overclocking took place. But number isn't everything. Simply put, the VS450 is not able to supply more than the bare-minimum. This is why the Corsair VS series is not recommended. I don't remember where but I read somewhere that the VS450W is able to provide only around 250-270W at load.Admittedly I also have the same psu but on a very basic Pentium PC and don't use a gpu either. I bought the PSU anyway because of budget issue (it was used one so got it for a low price) and keeping that 270w in mind. +1 to stop using that PSU. Its not worth the risk. Quote Link to comment Share on other sites More sharing options...
SonicDave Posted March 5, 2016 Report Share Posted March 5, 2016 Hey guys, the CM G550M psu is available for 5800rs. http://mdcomputers.in/products/smps/80plusbronze/cooler-master-smps-g550m.html Quote Link to comment Share on other sites More sharing options...
Jerush Posted March 5, 2016 Report Share Posted March 5, 2016 I got a new fiber net connection. The fiber net modem doesn't have any options for NAT or DMZ or port forwarding. So, I'm unable to play online on PS4, getting the error 'NAT failed'. Any assistance? Any alternatives? Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 5, 2016 Report Share Posted March 5, 2016 I got a new fiber net connection. The fiber net modem doesn't have any options for NAT or DMZ or port forwarding. So, I'm unable to play online on PS4, getting the error 'NAT failed'. Any assistance? Any alternatives? NAT settings or DMZ to be done on router. If you have a router try to put an IP on DMZ. Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 5, 2016 Report Share Posted March 5, 2016 (edited) Double post Edited March 5, 2016 by djanuj Quote Link to comment Share on other sites More sharing options...
Jerush Posted March 5, 2016 Report Share Posted March 5, 2016 nope doesnt work...still getting the same error Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 5, 2016 Report Share Posted March 5, 2016 So are you using the modem that service provider gave you or you have connected a separate router along with the modem? Which model is the modem? Quote Link to comment Share on other sites More sharing options...
Jerush Posted March 5, 2016 Report Share Posted March 5, 2016 (edited) the service provider gave DBC modem 'BC 01PNU-GE-C' which is connected to Dlink2750U wifi router. PS4 and PC connected via Dlink Edited March 5, 2016 by Jerush Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 5, 2016 Report Share Posted March 5, 2016 (edited) Dlink 2750U must have a DMZ settings. See this for more info. https://youtu.be/QLiDieuQEw0 https://youtu.be/I44bKa-Fe6Q Edited March 5, 2016 by djanuj Quote Link to comment Share on other sites More sharing options...
Jerush Posted March 6, 2016 Report Share Posted March 6, 2016 have set up both port forwarding and DMZ on the dlink router.. still getting the same issue Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 6, 2016 Report Share Posted March 6, 2016 have set up both port forwarding and DMZ on the dlink router.. still getting the same issue What error are you getting exactly. Is it the router displaying error or you have setup but after testing the network test fails? Quote Link to comment Share on other sites More sharing options...
Pushy Posted March 6, 2016 Report Share Posted March 6, 2016 guys, the f**k is this sh*t? every time i reopen chrome, i am always greeted with this page (have checked re-open tab's from last session, but i never visit this site, but, whenever i re open chrome, this site opens automatically, even my default page is blank) and then, every time i boot up, this is the error windows throws at me every time pc got infected? (running win8.1 pro x64) Quote Link to comment Share on other sites More sharing options...
djanuj Posted March 6, 2016 Report Share Posted March 6, 2016 (edited) guys, the f**k is this sh*t? every time i reopen chrome, i am always greeted with this page (have checked re-open tab's from last session, but i never visit this site, but, whenever i re open chrome, this site opens automatically, even my default page is blank) and then, every time i boot up, this is the error windows throws at me every time pc got infected? (running win8.1 pro x64) Did you use any pirated copy of any software or patches? That website is maybe linked to the piracy related website. That website is may have installed a script in the app such that when you use the patch it hijacks your browser to show their website. Use Malwarebytes and remove the app mentioned by malwarebytes. The reload.vbs also seems like a script trying to start. Do you have a antivirus Also delete your host file from c:/windows/system32/drivers/etc And download a original host file. You can get that host file from Microsoft. Just search default host file for Windows. And download from Microsoft website only. Edited March 6, 2016 by djanuj Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.