abhi90 Posted August 9, 2023 Report Share Posted August 9, 2023 16 minutes ago, KunjanPSD said: Mattress brand, type, model suggestions please. I have been recommended Sprintek for the mid range (20-60k) and Snoozer for the high end (1L+) for a slightly bigger than king size bed. King Koil? Quote Link to comment Share on other sites More sharing options...
KunjanPSD Posted August 9, 2023 Report Share Posted August 9, 2023 (edited) 13 minutes ago, abhi90 said: King Koil? That was one of the other recommendations in the same range as Springtek. But the latter is priced better and so is the trial policy. Sprinktek is offering hybrid latex + pocket sprinks for 25k and 100% natural latex at 60k, many are recommending the later but I am not sure that is because of the bias of having bought it or if they have tried the same. Snoozer is basically the brand used by 5 Stars, if you have stayed in one in India, most likely you have slept on a Snoozer but costs a bomb. Edited August 9, 2023 by KunjanPSD Quote Link to comment Share on other sites More sharing options...
abhi90 Posted August 9, 2023 Report Share Posted August 9, 2023 13 minutes ago, KunjanPSD said: That was one of the other recommendations in the same range as Springtek. But the latter is priced better and so is the trial policy. Sprinktek is offering hybrid latex + pocket sprinks for 25k and 100% natural latex at 60k, many are recommending the later but I am not sure that is because of the bias of having bought it or if they have tried the same. Snoozer is basically the brand used by 5 Stars, if you have stayed in one in India, most likely you have slept on a Snoozer but costs a bomb. Leela uses King Koil. Plus springtek is an indian brand! A quick google tells me you can look into Hush mattresses which are used by Taj Quote Link to comment Share on other sites More sharing options...
LordSpymaster Posted August 10, 2023 Report Share Posted August 10, 2023 I use Sleepwell with no complaints, has been over 10 years... Quote Link to comment Share on other sites More sharing options...
dylanjosh Posted August 16, 2023 Report Share Posted August 16, 2023 Can anyone recommend a good quality French coffee press and also beans. Thanks. Quote Link to comment Share on other sites More sharing options...
DinJo Posted November 20, 2023 Report Share Posted November 20, 2023 (edited) @Shantz Have you been playing around with RGB led with esp device?. Wanting to setup ambilight for tv which could work in Netflix and could see it require hdmi splitter and capture card but seem to find a quality one Capture card http://bluerigger.co.in/product/hdmi-switches/ Edited November 20, 2023 by DinJo Quote Link to comment Share on other sites More sharing options...
Shantz Posted November 21, 2023 Report Share Posted November 21, 2023 I haven't. Controlling it with an ESP32 should be fairly straight forward. Color matching with surely require some kind of capture card Quote Link to comment Share on other sites More sharing options...
DinJo Posted November 22, 2023 Report Share Posted November 22, 2023 20 hours ago, Shantz said: I haven't. Controlling it with an ESP32 should be fairly straight forward. Color matching with surely require some kind of capture card Thanks what is the best source to get ws2812b is roboway.in trusted Quote Link to comment Share on other sites More sharing options...
rushab oswal Posted November 24, 2023 Report Share Posted November 24, 2023 Im looking for a monitor for my shop. No gaming , will be mostly used for editing, coding , and browsing LG UltraWide 29 inch (73 cm) IPS FHD, 2560x1080 Pixels, Color Calibrated, 100Hz, 7W x 2 Inbuilt Speaker, USB-C, Display Port, HDMI, White Color-29WQ600 https://amzn.eu/d/eNz1ktg Is this a good one? Any other recommendations? Color accuracy for photo editing is the main deciding factor Quote Link to comment Share on other sites More sharing options...
DinJo Posted November 29, 2023 Report Share Posted November 29, 2023 Finally was able to setup hyperion using it for non drm apps it works great Quote Link to comment Share on other sites More sharing options...
rushab oswal Posted November 30, 2023 Report Share Posted November 30, 2023 Where can i get a mechanical number pad only , currently using the k2 v2 which has no numpad and k4 costs a whopping 10,000. Any ideas? Quote Link to comment Share on other sites More sharing options...
rushab oswal Posted November 30, 2023 Report Share Posted November 30, 2023 11 minutes ago, rushab oswal said: Where can i get a mechanical number pad only , currently using the k2 v2 which has no numpad and k4 costs a whopping 10,000. Any ideas? something similar to https://www.ubuy.co.in/product/2DIEBST6-motospeed-k23-mechanical-numeric-keypad-red-switch-wired-21-keys-mini-numpad-portable-keypad-backlig this but from a trusted store and better price Quote Link to comment Share on other sites More sharing options...
Bird Bird Bird Posted December 7, 2023 Report Share Posted December 7, 2023 I have the same issue as https://www.ifixit.com/Answers/View/767614/Not+working+but+green+light+is+blinking with MX Master 3 - it has completely stopped working. Logi support says there is no repair and nothing they can do. Any options or solutions from anyone ? Quote Link to comment Share on other sites More sharing options...
SuperT Posted December 7, 2023 Report Share Posted December 7, 2023 (edited) 50 minutes ago, Bird Bird Bird said: I have the same issue as https://www.ifixit.com/Answers/View/767614/Not+working+but+green+light+is+blinking with MX Master 3 - it has completely stopped working. Logi support says there is no repair and nothing they can do. Any options or solutions from anyone ? Out of warranty ? Because Logi is very good when it comes to replacement. Edited December 7, 2023 by SuperT Quote Link to comment Share on other sites More sharing options...
Bird Bird Bird Posted December 7, 2023 Report Share Posted December 7, 2023 3 minutes ago, SuperT said: Out of warranty ? Because Logi is very good when it comes to replacement. Yeah. It’s 2 years old. Warranty is just one year but it’s an expensive mouse. Will prefer getting repaired or replaced. Quote Link to comment Share on other sites More sharing options...
SuperT Posted December 7, 2023 Report Share Posted December 7, 2023 3 minutes ago, Bird Bird Bird said: Yeah. It’s 2 years old. Warranty is just one year but it’s an expensive mouse. Will prefer getting repaired or replaced. Nehru Place Quote Link to comment Share on other sites More sharing options...
Bird Bird Bird Posted December 7, 2023 Report Share Posted December 7, 2023 24 minutes ago, SuperT said: Nehru Place Talked to logi. No repair or replacement after 1 year. Babaji ka thullu basically. Quote Link to comment Share on other sites More sharing options...
SuperT Posted December 7, 2023 Report Share Posted December 7, 2023 (edited) 2 hours ago, Bird Bird Bird said: Talked to logi. No repair or replacement after 1 year. Babaji ka thullu basically. I am sure some local guys in Nehru Place can fix it or you can try atta market noida ? Edited December 7, 2023 by SuperT Quote Link to comment Share on other sites More sharing options...
Bird Bird Bird Posted December 7, 2023 Report Share Posted December 7, 2023 1 hour ago, SuperT said: I am sure some local guys in Nehru Place can fix it or you can try atta market noida ? So I turned it off and kept on charging for over 3 hours. Started working. Weird. It had over 50% battery and I think it suddenly failed ? Quote Link to comment Share on other sites More sharing options...
rushab oswal Posted December 10, 2023 Report Share Posted December 10, 2023 On 12/7/2023 at 4:00 PM, Bird Bird Bird said: I have the same issue as https://www.ifixit.com/Answers/View/767614/Not+working+but+green+light+is+blinking with MX Master 3 - it has completely stopped working. Logi support says there is no repair and nothing they can do. Any options or solutions from anyone ? On 12/7/2023 at 5:22 PM, Bird Bird Bird said: Talked to logi. No repair or replacement after 1 year. Babaji ka thullu basically. On 12/7/2023 at 9:14 PM, Bird Bird Bird said: So I turned it off and kept on charging for over 3 hours. Started working. Weird. It had over 50% battery and I think it suddenly failed ? I just got one for me . No support after warranty is such a DXXX move. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.